Laminata Fencing

Laminata has designed small format CLT panels that can be lifted by hand and installed with a power drill and offers a practical fencing system that can be installed by YOU.  Able to be installed vertically or horizontally with minimal effort. 

CLT is an innovative wood product that was introduced in the early 1990's in Austria and Germany and has been gaining popularity in residential and commercial applications in Europe. CLT panels consist of several layers of lumber boards stacked crosswise at 90 degrees and glued together on their wide faces. Timber in the outer layers of the CLT panels are oriented to run parallel to the major span direction to maximise the span capacity.

The cross-laminating process provides improved dimensional stability to the product which allows for the prefabrication of panels. Additionally, cross laminating provides relatively high in-plane and out-of-plane strength and stiffness properties, giving it two-way action capabilities similar to a reinforced concrete slab. The 'reinforcement' effect provided by the cross lamination in CLT also considerably increases the splitting resistance of CLT for fixings and connections.

Reduction of waste, manufacturing in a safe controlled environment and fast assembly time for on-site works are just some of the advantages that a Prefab fencing system has over traditional post and rail construction. The Laminata fence system boasts some additional defining efficiencies and installation advantages that are unique to the brand.

Laminata fencing components are prefabricated in a controlled factory environment in Northlan with quality assurance throughout the process to ensure consistent quality and dimensional accuracy of all the components. The factory assembled panels that make up the core of the Laminata fence system are a lamination of three offset layers of 14mm x 140mm pine boards. LOCTITE-PURBONDTM adhesive is applied to the board faces, then the assembly of transverse and longitudinal boards are pressed at controlled high pressure until cured.  Laminata small format CLT fence panels are machined with a rougher-headed surface and 'V' groove for the TG & V effect.

  • Neighbour friendly, mirrored fence design
  • Horizontal or vertical panels
  • Fast and efficient to install
  • Durable
  • CLT prevents shrinking, warping or twisting
  • Pool fencing compliant
  • Acoustic
  • Screw fixings
  • MicroPro (MCA) treated Kiln dried Panels

 

 

MAKE AN ENQUIRY ABOUT LAMINATA FENCING

*

*

*

*